It’s time to dust off the Amateur Radio Station In a Box (ARSIB) and get it ready for field day.
Back in 2006 I was inspired by other hams who had put together portable stations that were built inside waterproof containers, capable of multimode (phone, CW, digital) HF, VHF, or UHF operation, easily powered by 110v/220v AC or a 12v source, able to carry with one hand, and ready for immediate operation with minimal setup.
My prototype was the ARSIB which I used on several occasions.
The ARSIB was based around my FT-817 to provide complete flexibility of a minimalist operation on AA batteries if need be. For normal operations, the 100W Tokyo HyPower amplifier gets me were I need to be. I had a lot of fun with the ARSIB using it during an RV DXpedition and for a lighthouse activation.
I now want to take the ARSIB to the next level – fine tune the design a bit. In searching around I have found several sources of inspiration:
For my second generation ARSIB, I would like to improve the inner shelving structure supporting the radio equipment. Another goal of mine is not to put any holes in the waterproof container, which has limited some of my arrangements inside the box. I also want all the equipment to be able to travel well, without worry of damage. I also need to clean up the wiring; power, audio, and antenna. Some more ascetically pleasing, but functional.
I think the Dell Mini will serve as the perfect companion for the eARSIB.
Ultimately I hope to use the eARSIB (“e” is for enhanced) for Field Day 2009. The plan now is to link with KD6EUG, Larry, up in the Sierra Nevada’s for Field Day. In addition to participating in the event, we will string up an antenna or two for his cabin/shack… and maybe even get an APRS weather station operational as well.
Now it is time to make it happen!
I had a good time. Putting together the Amateur Radio Station In a Box (
Although I’ve been a ham since 2001, I’ll consider this my first Field Day. Instead of participating in the local RACES field site or one of the local clubs, I decided I’d operate from home using emergency power. I spent the majority of the day completing my amateur-radio-station-in-a-box (ARSIB) project. The ARSIB is centered around an FT-817ND and is housed in a large dry box, the type normally used by outdoors folks and hunters. I built a shelf unit that slides into the box. Components are stacked vertically and secured to their own shelf. At the bottom I have an Alinco powers supply, very compact. Above the power supply is the FT-817ND. Above that is a 100W Tokyo HyPower amplifier for the FT-817ND (normally a 5W rig). Above the amp is an LDG Z-11PRO, great tuner. The tuner is also connected to the FT-817 ACC outlet for seamless tuning during band changes. Above the tuner is an SWR/power meter. The power cables run up the side of the box and feed into a small RigRunner that is mounted on the inside lid of the box. I spent just about all day putting everything together, to include two trips to ACE Hardware.
