CW QSO

I jumped on the radio real quick last night before bed. After jumping around from 30M to 40M to 80M, I got an answer to my CQ from Tim, WD4GXD. Tim lives in Ruffin, a small town in the hills of western North Carolina, that I actually visited back in June of this year. We had a nice QSO, only wish it could have been longer. Tim was telling me that he had just picked up an IC-706 for mobile operations. He QRS’d so I was able to get almost 100% I hope to catch him again later for a longer ragchew.

I tried looking for a quick lunch time QSO, but had no luck. I think I might try and take the ARSIB out here to Fort Monroe and try to work a lunchtime QSO using a portable antenna. Might be fun.

Get Your Feet Wet Weekend

Despite all the controversy about licensing and requirements, there are a lot of new hams who are intrigued with the code after passing their 5WPM.

But, like we all were (or are!), they are intimidated and nervous about getting on the air. They’ve had bad experiences on Field Day or other contests and QSO’s where people won’t QRS (slow down), and they are getting frustrated. We don’t want that to happen! We want to encourage and nurture these new CW operators. The Novice RoundUp used to be a good forum for this, but the Novice concept is obsolete. Something needs to be implemented that would include all classes of newcomers and give them a friendly place to learn the ropes.

The 2006 Get Your Feet Wet Weekend will be 00:00Z Fri Sep 15 (Thursday local) to 00:00Z Sep 18 (Sunday local).

The focus is on sending slowly and clearly and sending the exchange in order. No memory or programable keyers or code readers are allowed – human-powered transmissions only. Certificates will be sent out to the top three scorers in each category free of charge.

The rules: Operate under one of two categories for the entire event, Newcomer or Experienced. You can be licensed a long time but still be a Newcomer to CW or contesting. You’re on the honor system: Choose whichever describes your ability.

Suggested calling frequencies: 3.610, 7.110, 14.110, 21.110, and 28.110. If you don’t hear anyone, go ahead and call. Get your feet wet and jump in with a CQ FC on a clear frequency. YOU are there listening; chances are someone else is listening and waiting to hear a CQ, too

Call CQ FC.

The Exchange: Callsign/N (newcomer) or Callsign/E (experienced), RST, Name, QTH, FISTS number or power, last two digits of the year licensed.

Example: WZ8C/E, 599, Nancy, MI, 0379, 88.

Count 2 points for working someone out of your category, 1 point for working someone in your category.

Multipliers are number of stations worked that were licensed 2000-2005.

Stations may be worked once per band for points, but their multiplier only counts once.

No WARC bands.

Contacts must be 2-way human-keyed CW (Iambics are fine – just no computerized or memory keyers).

Logs will be sent to Lee Hallin N7NU 3413 Walton Ln, Eugene OR 97408
or in ADIF format to hallinl@lanecc.edu within 30 days of the end of the event.

Lazy Sunday

Knocked out some more QSL cards and certificates for the W4M special event station. It’s fun going through all the QSL cards. Two QSL cards stood out from this morning, one from Washington State near Fort Lewis and the other from Sierra Vista, AZ… near Fort Huachuca. Each QSL response has the W4M folded QSL card, the Old Point Comfort Lighthouse (USA 567) QSL card, the W4M US Army Amateur Radio Society special event certificates, and sometimes a picture or two from the actual event.

The US Army Amateur Radio Society is picking up more members. We’ve been able to identify more hams downrange as well as hams getting ready to go – trying to get them their reciprocal licenses as soon as possible. Also identified some folks in Korea, to include a POC to help with licensing. I need to start looking at Germany as well… I’m sure there has to be quite a few Army hams in Germany.

…. and I even had a 40M CW QSO today! Had about a 40 minute ragchew with AA4TB who is down in Summervile, SC (near Charleston). Tommy put up with my horrible CW skills and kept it slow. I need to find the time to do some serious work on my CW. I wish I could find somebody I could establish a regular CW sked with… like two or three times a week. I think this would really help me improve. Plus – on air practice is a lot better than working one of those CW computer programs.

I have grand plans for a new antenna. The Radio Works is a local company and produces quality antennas. I have two Radio Works G5RVs – one of which I bought from a local ham. The antenna was originally purchased back in the 1980s, but unused. I used the antenna for the W4M special event station – still looked like new and worked like a champ. My current antenna is a B&W end fed inverted vee. Although it has omnidirectional properties, it has a N/S orientation. My plan is to put a Radio Works Carolina Windom 160 Special with a E/W orientation. I intend to use it as a flattop, 133′ in length. I have nice pine trees in the front and back yards, I think I can get the Window up about 50′ or more. Just waiting for my CSV17 Pneumatic Antenna Launcher!

Saturday… having fun

I had an interesting morning with a trip to The Suffolk Seaboard Station Railroad Museum. What a wonderful place! They had an elaborate model train layout that was based on Suffolk back in 1907. Also had an old telegraph key on display with a Morse Code dot and dash chart. Interesting to note…. it showed American Morse Code, not the international Morse.

The rest of the day has been spent working on QSLs for the W4M special event station. I will have all cards/certificates sent out by Monday to those who had sent me a SASE. In addition to the special event QSL card, I’m trying to include my special QSL card for the Old Point Comfort Lighthouse (USA 567) (http://www.ni0l.com/usa567/)… as well as the certificate. I think the certificates turned out nicely.

40M CW WAS NET

A description of the 40M WAS CW net and some operator recommendations…..

We have checkins of all skill levels and CW abilities, and everyone is always happy to have new stations join in with us. (We think) we are a friendly bunch, and strive to make every effort to help both the newbies and the regulars have fun.

When answering a station that has called you, it’s a general procedure to ID both callsigns first. Then, acknowledge receipt of his report to you with something like “tnx for the 579 579” or “QSL the 579 579″. (It helps NCS if you send the RST twice so he knows what report you think you got). Then, send a report back to the station who called you. Again, it helps to send his RST a couple of times, too. If he’s real weak to you, then maybe send it three of four times. That will save time in the long run if copy is tuff. We don’t normally chit chat much during the net, but pleasantries ( 73 or tnx for the call, etc) are certainly OK. When NCS is satisfied both stations have callsigns correct and reports rec’d on both sides, he will CFM (confirm) the contact as a good one and it becomes official. NCS then moves on to the next station on the list.

There is something on the club web page called ” CW Nets 101″, and maybe that will answer in more detail the questions about net protocol that you raised. Plus, listen to a few of the others, and you’ll pick it up right away. No one gets “huffy” here, so even if anyone does make a boo boo or two, nobody gets excited. There’s a list of CW net “Q” signals on the web page, too.

After your contact with W4BUR, I was trying to get you to repeat the report he sent you. He had sent you a 579, but at first you told me 599 but then changed it to 589. Conditions between you and I were pretty good, so I was fairly certain of the report you said you got. Joe did get the 579 you sent him. As NCS, I can only confirm the contact when I’m sure both stations got their reports correct. Then, all were disappointed when you couldn’t be raised after that contact. I was hoping I hadn’t offended you if you didn’t understand why I had to come back and ask you again. Anyhow, it’s just another net past with many more ahead !! Conditions have really worsened over the last few months, but I’m hoping for improvements soon.

We would really like to have you join us on a regular basis. We have many nets on other bands and modes, too. If you’re going to become a regular, I would suggest sending SASE’s to the free buros. Or, many use the postal plan WM9H provides. The Century Club buros are really fast and efficient, and your cards come fast. Again, info on the web page.

So, let me know if I can help you with anything. I’ll recognize your call next time. OH…The reason I had to keep asking for your callsign is that two other stations kept sending on top of you when you came back everytime I asked for your call. But, we got thru that, too.

Thanks again for checking in, and I hope you will be back.

73, Tom AA1NZ

2006 W1AW/K6KPH Field Day Bulletin Schedule


ZCZC AX02
QST de W1AW
Special Bulletin 2 ARLX002
>From ARRL Headquarters
Newington CT June 19, 2006
To all radio amateurs

SB SPCL ARL ARLX002
ARLX002 2006 W1AW/K6KPH Field Day Bulletin Schedule

2006 W1AW Field Day Bulletin Schedule

Day Mode Pacific Mountain Central Eastern

FRIDAY CW 5:00 PM 6:00 PM 7:00 PM 8:00 PM
Teleprinter 6:00 PM 7:00 PM 8:00 PM 9:00 PM
Phone 6:45 PM 7:45 PM 8:45 PM 9:45 PM
CW 8:00 PM 9:00 PM 10:00 PM 11:00 PM
SATURDAY CW 7:00 AM 8:00 AM 9:00 AM 10:00 AM
Phone 8:00 AM 9:00 AM 10:00 AM 11:00 AM
CW 5:00 PM 6:00 PM 7:00 PM 8:00 PM Teleprinter 6:00 PM 7:00 PM 8:00 PM 9:00 PM
Phone 6:45 PM 7:45 PM 8:45 PM 9:45 PM
SUNDAY CW 7:00 AM 8:00 AM 9:00 AM 10:00 AM
Phone 8:00 AM 9:00 AM 10:00 AM 11:00 AM
PSK31 9:00 AM 10:00 AM 11:00 AM 12:00 PM

2006 K6KPH Field Day Bulletin Schedule

Day Mode Pacific Mountain Central Eastern

SATURDAY CW 7:30 AM 8:30 AM 9:30 AM 10:30 AM
CW 5:30 PM 6:30 PM 7:30 PM 8:30 PM
Teleprinter 6:30 PM 7:30 PM 8:30 PM 9:30 PM

SUNDAY CW 7:30 AM 8:30 AM 9:30 AM 10:30 AM
Teleprinter 9:30 AM 10:30 AM 11:30 AM 12:30 PM

W1AW will operate on the regularly published frequencies.

The special PSK31 bulletin will be transmitted on the regular W1AW teleprinter frequencies.

CW frequencies are 1.8175, 3.5815, 7.0475, 14.0475, 18.0975, 21.0675, 28.0675 and 147.555 MHz.

Teleprinter frequencies are 3.625, 7.095, 14.095, 18.1025, 21.095, 28.095 and 147.555 MHz (includes PSK31).

Phone frequencies are 1.855, 3.990, 7.290, 14.290, 18.160, 21.390, 28.590 and 147.555 MHz.

W1AW will transmit the bulletin in 45.45-baud Baudot RTTY, 100-baud AMTOR FEC Mode B, and 110-baud ASCII.

The Maritime Radio Historical Society’s K6KPH will transmit the “W1AW” Field Day 2006 message for the benefit of West Coast stations on 3.5815, 7.0475, 14.0475, 18.0975 and 21.0675 MHz, CW only. The K6KPH schedule is accurate as of June 19, 2006.

K6KPH will be transmitting Baudot RTTY and FEC AMTOR on 7.095 and 14.095 MHz during Teleprinter transmissions.

Any additional transmissions or changes in the schedule will be posted on the web at, http://www.arrl.org/contests/forms/06-fd-w1aw-sked.html . NNNN /EX

A Simple ‘Iambic Paddle’ for Travelers


From : Charles & Sandra Cohen

Scott —

Sorry, no parts list. And the bottom is covered by silicone rubber, so a photo won’t help you.

Radio Shack should have everything except maybe the two switches. Those, you could get at any electronic parts distributor as “tactile switches”. They come in various sizes. Mine are 12mm square, with a 160 gm activation force. (less activation force would be better, but I wouldn’t want anything smaller).

The top of my phone jack was transparent, and I could figure out which pin (on the bottom) corresponded to which phone plug contact. You might have to enlarge one or two holes in the board, and I bent or broke one unused pin. But the rest of the pins go through the holes to the back of the board, and hold the phone jack in place.

Each switch has four pins (two for each side of the switch contacts). I just pushed them through the holes in the board without any sockets. The pins fit tightly enough so there’s no play after the pins are soldered (as described next).

On the back of the board, there are four wires soldered in place:

One from the “dit” switch to the “tip” contact of the phone jack;

One from the “dah” switch to the “middle ring” contact of the phone jack;

One from the “ground” (outer barrel) contact of the phone jack to the _other side_ of the “dit” switch;

Another from the “ground” contact of the phone jack to the _other side_ of the “dah” switch.

The ceramic fridge magnets (Krazy-glued to the back) are thick enough so that the pins of the switches and phone jack don’t touch the FT-817. I covered the soldered joints with silicone sealant — no possibility for accidental shorts, that way.

That’s it. This was one of the few times that something I built worked right on the first try. This is _not_ a fancy project.

Good luck !

Charles

K9YA Code Practice Net – SLOW

Wednesday May 17, 2006
7:00 pm – 8:00 pm
This event repeats on the third Wednesday of every month.
Event Location: 7.137 MHz (plus or minus QRM)
Street: http://www.k9ya.org
Notes:
Listen for CQ Slow Net—send your callsign. We QRS to the speed of the slowest
op. We’re here to have fun and practice code.

UTC: Currently 24ØØ Z

FREQUENCY: 7.137 MHz +/- QRM

CW Shootout!

Sunday Feb 26 I went to the Fayetteville WV hamfest. It’s a small hamfest held in the American Legion hall, but a very nice time.

Around 11:00AM they started hollerin’ it was time for the CW Shootout. They promised a $1/WPM cash prize for anyone who could hold out.

Well, that fascinated me so I followed the crowd (well, you can call 8 a crowd, ‘cuz it’s more than 3 and we all know “3’s a crowd!” Maybe 8’s a MOB?)

We went into a back room where some tables and folding chairs were set up. The moderator fired up his lap top and passed out pens and pieces of paper.

They started at 15 WPM with “WELCOME TO THE CW SHOOTOUT.” and everyone said, “yeah, yeah, let’s get going!”

He went to 20 WPM and sent “FOR SALE, ICOM 7800 CHEAP, WILL FINANCE.” A few chuckles, a snicker, and they were ready to move on.

At 25 WPM we got “STAY SHARP AND GOOD LUCK IN THE CONTEST.” and this was about where I fell out.

I didn’t copy the 30 WPM, 35 WPM, 40 WPM, and 45 WPM. They were all short statements like the others, one of them was, “KEEP UP THE GOOD WORK, YOU’RE ALMOST AT THE MONEY.” Fewer and fewer pens were active as we proceded. Some folks were copying in their heads, and I could hear the short words like “THE”, “AS”, “FOR”, and such up to about 40 WPM.

Beyond that I was just sitting there watching in amazement as N3BA kept writing. He copied all the way up to 50 WPM, and the final transmission said something about “THIS IS AS FAST AS THE MACHINE WILL GO.” which I know only because he read it back for the copy check.

So Bob Anderson N3BA from Covington, Virginia won the $50 prize. We all queued up to congratulate him as we went back to the hamfest activities.

Well, **I** for one, was impressed.


Bob West WA8YCD
883 Goshen Rd
Morgantown WV 26508
rlwest@wa8ycd.net
Monongalia County FM09an
39d 37m 26s N 79d 57m 55s W
http://www.wa8ycd.net

Why I Enjoy Morse Code – Carl W. Davis – W8WZ

Why I Enjoy Morse Code

-An Attempt at a Balanced and Fair View of my Favorite Operating Mode-

Carl W. Davis – W8WZ

Perhaps my love for CW comes out of my appreciation for simple elegance. I prefer to sail instead of motor. I prefer to cook from scratch using organic ingredients, especially those grown in my garden. I love a good glass of wine, and know the history and wine making philosophy of most of the vineyards represented in my wine rack. I smoke a pipe, and savor the nuances of the various tobaccos I enjoy. So, perhaps CW is the natural mode for me.

But, unlike many CW aficionados, I will be quick to point out what CW is not.

CW is not the best mode for disaster communications, unless of course, it is the only mode available at the time. While I am a fan of CW, and a frequent QRP operator, I do realize that there is a time and a place for everything. And, if there was ever a time for QRO SSB, Disaster/Emergency communications is it. More people can understand and use SSB, and it is generally much faster than CW. Yes, it is theoretically possible that atmospheric conditions will make SSB copy difficult, and yes, it is true that a weak CW signal is easier to copy than a weak SSB signal. However, such circumstances are rare, and while CW, like any other mode may be used as a backup, the primary mode of disaster communications is rightly Single Sideband Telephone. Also, the proper response for a net control of a disaster net that cannot be heard well, is not to change modes from SSB to CW. It is rather to increase power, switch antennas or to allow a better-qualified station to serve as Net Control.

Nor does CW proficiency guarantee good operating practices. Although, I do witness MUCH better operating practices overall among CW operators, than telephone operators, each day I usually hear at least one CW station begin calling CQ without a customary “QRL?.” CW ops do tend to be more willing to answer CQ calls in general, and are more tolerant of weak signal work.

Neither is CW the best mode for traffic handling. In this day and age, if our goal is to get a message transferred from station to station, an error correcting digital mode is best suited to the task. These modes share the small bandwidth and weak signal reception capacity that CW is famous for. However, they also have automatic error correction and since text is being transferred from computer to computer, the likely hood of successful and efficient communication is great. Certainly, if a computer is unavailable, and a station is incapable of phone communications, THEN CW may be the best choice at hand. But it should not be the first choice.

CW is a mode for the purist. It takes skill. It takes time. Like all good things in life, it is not instant. It takes dedication to learn Morse code. And, it takes practice to become proficient in its use. But this investment of time and intellectual application is rewarded greatly with the satisfaction of accomplishment that comes only through hard work.

Let’s face it, Amateur Radio is not a cutting edge technology. Of course, a few among our ranks are using our spectrum and hobby for some high-tech work. But they are the overwhelming minority. The VAST majority of us are using communication techniques at least 50 years old. That is not a complaint, as I do not think there is any thing wrong with that reality. But it is a reality and should be embraced by the Amateur Community. Pretending that Amateur Television, PSK31, or Packet are “new and modern” technologies is downright humorous in this time of Blackberries, I pods, Web-cams, and cellular telephones. So, if Ham Radio no longer offers cutting edge communication technology, then what does it offer? It offers classically simple and elegant technology that takes skill and finesse in order to master. It is NOT user friendly. It takes personal work and an application of knowledge. That is why CW is so appealing to me. In this day of “plug and play” and instant everything, it is refreshing to be involved in something that moves relatively slow and requires work and understanding.

While I certainly respect the rights of other Amateurs to have their own favorite modes of communication within our broad hobby. I prefer CW for the following reasons:

If I wanted to talk to people, I could use the telephone, cellular telephone, or Internet.

If I wanted to use a computer to communicate with others, the Internet is an awesome forum.

If I wanted to trade pictures I would send them through e-mail.

If I wanted to view fast-scan television images, I would use a web-cam.

Ham Radio is not the best forum for those modes of communication.

However, if I want to engage my brain by using Morse code then Ham Radio CW is the best forum. If I want to use an antique transmitter and receiver to communicate, then Ham Radio is the best forum. Therefore, that is what I use ham radio for.

For the sake of total disclosure, while I have disagreed with several of the arguments frequently put forward for maintaining Morse code as a requirement for Amateur Licensing, I do believe that it should be maintained. My rationale however is because it helps prevent ham radio from becoming just another user-friendly “plug and play” medium. We have enough of those. We need a hobby that is different from the other modes of communication available to us. Our hobby needs to be a more challenging one. Even as we embrace the fact that we are not cutting-edge, we should embrace the identity of hardworking appliers of knowledge. And, while CW operation is not necessarily needed for a Ham to have that identity, it does typify the identity. It also shows that hams are willing to push themselves and work hard. I support Morse testing requirements as a way to resist the attitude of instant gratification that I see growing in our world. I also oppose band-plan changes that are likely to cause more non-cw stations to operate in the current “cw-sections” of our bands, as I don’t like competing against non cw-stations for bandwidth. Are those opinions rational? Perhaps not, but frankly, opinions rarely are. Nor, do they need to be rational in order to be valid.

So, if you find yourself tired of talking and typing, then tune on down to the bottom of the band.

Get out the notepad and fountain pen. Put on the headphones and copy some code. Perhaps, you will also enjoy lighting a bowl of MacBaren’s pipe tobacco and sipping a locally grown wine while you decipher the series of beeps that you find being transmitted. Maybe you will also try firing up the old tube rig you have sitting around, so that you can feel the warmth and see the glow of the electron tubes. If so, you will then understand what I enjoy about our hobby.