What’s going on in the hamshack?

(1) Two shelves are up. I offloaded my computer that handles the weather station, my printer, the EchoIRLP node, and the TM-D710A that supports both the weather station via APRS and the EchoIRLP node. I put wheels on the hamshack table after I moved it from the rental we were in to our current house. This raised the table to the perfect height, allowing my chair to slide under. The wheels also allow me to swing the table out to get to the back side and take care of any wiring issues with a fair degree of ease. But the weight of the equipment that piled up on the far end of the table made it hard to move. With the equipment I rarely touch placed up on the shelves, the table is much easier to move.

(2) I got my West Mountain Radio Super PWRgate PG40S hooked up. And it works! Additionaly, I have an UPS hooked up. So I should be good for backup power to run the weather/APRS station.

(3) The maps are up! I have the world map and a North America map. It looks like Millennia Arts no longer produce these maps. Who can blame them? I purchased these maps in 2006 and how many additional entities have there been since then? I’d imagine it is just not cost effective to produce up-to-date, high-quality maps like these.

(4) My kindergardener had a weekend project to collect 100 of something. Why not a 100 QSL cards? I dug through my pile pieceing together a variety of cards. Not quite ready for DXCC submission, but going through my tub-o-cards has motivated me to organize my card collection (… and prep for my DXCC submission).

(5) Speaking of QSL cards, it is time to address the “log problem”. Since my first DX contact (VP5VAC, 21 May 2005, on 6M), I have jumped around to differnt logging programs (and different computer OSes). I have txt files, MDB files, and adi files. Logs from special event stations, lighthouse activations, Field Day, Iraq, Korea, and just sitting in front of the rig spinning and grinning. I have used LoTW and eQSL. I’ve also had a few different callsigns. It is time to establish the MASTER LOG. One-stop-shopping for all my contacts that exist currently as some form of a digital log. The tool to get me to where I need to be appears to be DX Shell’s Contest LogChecker. The application will allow me to take many different types of formated logs and combine them together.

(6) Were we speaking of QSL cards? Jeff, KE9V, says he is getting out of the QSL card game. [AE5X as well] I can understand his motivations and why he arrived at the decision to forego the hard copy QSL card. I may, someday, arrive at a similar decision. Although it looks like AA6E is proud of his card. But as of now, I still love QSL cards… desinging my own, sending them, receiving them, getting that fat package from the Buro, etc. That being said, I designed a new QSL card for my new QTH here in Lansing, KS:

…. I hope to receive them soon – and hope to work you soon so I can send one your way.

aprs.fi closed in U.S. on Wednesday

From: http://blog.aprs.fi/2012/01/aprsfi-closed-in-us-on-wednesday.html

aprs.fi will join Wikipedia and Reddit, and protest the proposed U.S. SOPA/PROTECT-IP legislation by closing down on Wednesday.

The aprs.fi outage will only affect clients in the United States (or those with IP address mapping an U.S. network operator – the targeting is not fully accurate).

Although the law is being made in the U.S., it will break the Internet on a global scale by making sites such as aprs.fi liable for links and content posted by the users of the site. Sites like aprs.fi are commonly run by individual developers or small volunteer teams. Due to the huge volume of automatically published user-generated content (50 packets per second currently!) it would be impossible for me to go through it all before publishing. If some APRS user would post links to copyright-infringing material, even when that material would reside somewhere else than aprs.fi itself, aprs.fi could be shut down in the U.S. and there would not be much that I could do about it.

I read earlier about the Wikipedia outage. I wonder who will be next to jump on the protest bandwagon. There is nothing that warms the cockles of my heart more than a good ol’ fashion protest.

Pearl Harbor: Patton vs The Signal Corps



“Getting the Message Through: A Branch History of the U.S. Army Signal Corps” by Rebecca Robbins Raines
CENTER OF MILITARY HISTORY, UNITED STATES ARMY, WASHINGTON, D.C., 1996 (pgs 242-244)

During 1940 President Roosevelt had transferred the Pacific Fleet from bases on the West Coast of the United States to Pearl Harbor on the Hawaiian island of Oahu, hoping that its presence might act as a deterrent upon Japanese ambitions. Yet the move also made the fleet more vulnerable. Despite Oahu’s strategic importance, the air warning system on the island had not become fully operational by December 1941. The Signal Corps had provided SCR-270 and 271 radar sets earlier in the year, but the construction of fixed sites had been delayed, and radar protection was limited to six mobile stations operating on a part-time basis to test the equipment and train the crews. Though aware of the dangers of war, the Army and Navy commanders on Oahu, Lt. Gen. Walter C. Short and Admiral Husband E. Kimmel, did not anticipate that Pearl Harbor would be the target; a Japanese strike against American bases in the Philippines appeared more probable. In Hawaii, sabotage and subversive acts by Japanese inhabitants seemed to pose more immediate threats, and precautions were taken. The Japanese-American population of Hawaii proved, however, to be overwhelmingly loyal to the United States.

Because the Signal Corps’ plans to modernize its strategic communications during the previous decade had been stymied, the Army had only a limited ability to communicate with the garrison in Hawaii. In 1930 the Corps had moved WAR’s transmitter to Fort Myer, Virginia, and had constructed a building to house its new, high-frequency equipment. Four years later it added a new diamond antenna, which enabled faster transmission. But in 1939, when the Corps wished to further expand its facilities at Fort Myer to include a rhombic antenna for point-to-point communication with Seattle, it ran into difficulty. The post commander, Col. George S. Patton, Jr., objected to the Signal Corps’ plans. The new antenna would encroach upon the turf he used as a polo field and the radio towers would obstruct the view. Patton held his ground and prevented the Signal Corps from installing the new equipment. At the same time, the Navy was about to abandon its Arlington radio station located adjacent to Fort Myer and offered it to the Army. Patton, wishing instead to use the Navy’s buildings to house his enlisted personnel, opposed the station’s transfer. As a result of the controversy, the Navy withdrew its offer and the Signal Corps lost the opportunity to improve its facilities.

Though a seemingly minor bureaucratic battle, the situation had serious con­sequences two years later. Early in the afternoon of 6 December 1941, the Signal Intelligence Service began receiving a long dispatch in fourteen parts from Tokyo addressed to the Japanese embassy in Washington. The Japanese deliberately delayed sending the final portion of the message until the next day, in which they announced that the Japanese government would sever diplomatic relations with the United States effective at one o’clock that afternoon. At that hour, it would be early morning in Pearl Harbor.

Upon receiving the decoded message on the morning of 7 December, Chief of Staff Marshall recognized its importance. Although he could have called Short directly, Marshall did not do so because the scrambler telephone was not considered secure. Instead, he decided to send a written message through the War Department Message Center. Unfortunately, the center’s radio encountered heavy static and could not get through to Honolulu. Expanded facilities at Fort Myer could perhaps have eliminated this problem. The signal officer on duty, Lt. Col. Edward F French, therefore sent the message via commercial telegraph to San Francisco, where it was relayed by radio to the RCA office in Honolulu. That office had installed a teletype connection with Fort Shafter, but the teletypewriter was not yet functional. An RCA messenger was carrying the news to Fort Shafter by motorcycle when Japanese bombs began falling; a huge traffic jam developed because of the attack, and General Short did not receive the message until that afternoon.

Yes… the bands are open

Like you needed me to tell you about it.

I was initially licensed in 2001. Finally upgraded to General in 2005. Up to this point, my ham radio career has been under less than optimal propagation. From the oldtimers, I’d heard tales of 10 meters… when the sunspots where there, 10 meters could be worked around the world with only a wet clothesline (not even wet, just a bit damp). Frankly, it was hard to believe. My one prior 10 meter contact had been an opening QSO during the 2006 Field Day… Virginia to New York, some serious DX? [I thought so at the time.]

We’ve all heard the news… 10 meters is open. But from an HF standpoint, I was limited to my Buddipole, where I was nugging out CW contacts on the 40M Novice Band.

This weekend I threw up some wire and everything changed…..

Europe, the Caribbean, Alaska, 10 meter magic! (… I thought 6 meters was The Magic Band?) 10 meters was like a local 80 meter ragchew without the S5 noise floor, everybody has a 2KW amp, and the vast majority of the inbreds were nowhere to be found.

Thanks be to Apollo – may the sunspots continue!

Time to look about getting a 10-10 membership…. and, with a little luck, I might even have the cards for DXCC.(!)

…. need to put a map up on the wall.

Ham Radio Deluxe vs fldigi

I’ve recently re-established my station here in Kansas. The majority of all the components of my station I was using previously in Korea: Elecraft K3 rig, a Dell Zino PC, using the MicroHam USB III as an interface between the radio and computer. The Dell Zino PC is configured for dual-boot: Windows 7 and Ubuntu. Last year I spent a good deal of time configuring fldigi, under Ubuntu, to fulfill the majority of my amateur radio automation requirements (rig control, logging, digital modes). After a bit of trial and error, I had fldigi working quite well.

Once I was back here in Kansas, I had a problem configuring the K3 – CW, as a mode, wasn’t working. Figuring I had messed up a setting, I reset the K3… which ended up not being the smartest move. Up to this point, I had never updated the K3’s firmware or backed up the settings. I (incorrectly) believed that Elecraft’s configuration software was for Windows only. An email to Elecraft generated a quick response with a copy of the software configuration file for my specific rig.

Weeks past as I avoided getting the hamshack into proper order. The hamshack became the default location for stashing half unpacked boxes. Once I finally made serious progress in sorting through and organizing everything, I was able to get to the K3 and PC. I booted up Windows 7, connected the PC to the K3, updated the firmware, and reloaded the original factory software settings. Things were looking up.

I decided to see if Ham Radio Deluxe under Windows 7 was easier to use than fldigi. I updated Ham Radio Deluxe to the current version and then attempted to get the MicroHam USB III to work. Frankly it was a pretty kludgey process. An additional program had to be installed to create a virtual com port in order to allow the MicroHam USB III to work. Configuring the soundcard, resident in the USB III, was also not very successful. Then I tried Ham Radio Deluxe, which had been my software of choice a little over a year ago. Bottom line, I was not pleased with Ham Radio Deluxe and decided to switch back to fldigi.

Booting into Ubuntu, fldigi worked from the get go…. rig control, log, and digital modes. For now, I’ll be sticking with Ubuntu and fldigi.

NOTE: Here is a list of settings that I use:

Fldigi config:
Rig control
– RigCAT
– /dev/tty/USB0
– Baud rate: 38400
– Toggle DTR for PTT

Ubuntu Sound Preferences
– Hardware: USB Audio CODEC, Analog Stereo Duplex
– Input: Internal Audio Analog Stereo [this confuses me, because I would expect the input would be associated with the USB Audio device (aka the Microham)
– Output: USB Audio CODEC Analog Stereo
– Application: No application

Wire in the trees…

Finally got around to hanging some wire today. At times it seemed like the trees possessed some type of magnetic properties, the wire clinging to every branch (… reminded me of Charlie Brown and his kite experiences). The good news is that the CSV19 Pneumatic Antenna Launcher is still fully operational. I used the small air compressor from my wife’s emergency car kit to fill it up. Admittedly, the first couple of shots from the CSV19 were a bit off. But once I had the CSV19 zeroed in, I was pretty accurate. Thankfully the XYL arrived home and was able to help me with some of the finesse work of pulling the wire up into the trees. The G5RV is up and operational. Now it is time to start filling up the log.

Radio Works – I love your antennas but your website needs a serious update.

More good news… I should have my 2m/70cm antenna up on the chimney on Monday.