SPARK – Southern Peninsula Amateur Radio Klub


I finally joined a local club – they meet on the first Tuesday of every month and I went to the first meeting earlier tonight. Great group of folks with a good sense of humor.

One interesting fact that I found out was the club used to have their repeater on top of the Chamberlain Hotel… the historic hotel located on Fort Monroe.

Here’s an interesting story I found about the hotel:

I and my family would spend a bit of our spring vacation at the Chamberlain Hotel at “Old Point Comfort” in Hampton, Virginia across the street from Fort Monroe. My folks spent their honeymoon there in 1948, hence our annual visits. She was an aging lady, even then. Now no more.

“Old Point Comfort became a popular tourist destination in the early to mid 1800s around the same time Virginia was gaining popularity for her hot springs. Like the hot springs, salt water bathing as well as the salty bay air was believed to have revitalizing and health restorative properties, not to mention the social aspects. This waterside building is the historic Chamberlain Hotel on Fort Monroe at Old Point Comfort. It was designed in the Georgian style by Richmond architect Marcellus Wright after the original Vanderbilt-Chamberlain Hotel, built in 1890 on the same spot, burned to the ground in 1920. The new hotel opened in 1928 and operated until November of 2001, when the Hotel closed its doors forever. A development company is now refitting and cleaning up the hotel and turning it into expensive retirement condominiums.¹”

We three were given free rein to roam the premises. Oh, we weren’t to go out on the steamship pier (destroyed in a storm in the mid-60’s) unless accompanied by an adult, but otherwise, we could roam the grounds and the beach with impunity, play billiards, shuffleboard or pingpong in the game room if the weather turned foul, or swim to our heart’s content in the indoor, heated salt-water swimming pool. Such fun floating supported like a bobbing cork in the blood-warm salt water straight from the Bay.

If hungry, we could get a bite from the snack bar. Or a whole meal, if we were willing to get dressed, could be obtained in the dining room. Here I met up with grits, red beans and gravy, corn pone, and oysters, raw and cooked in all manner of dishes. Here, my mother honed our manners as we sat at table with real linens and silverware, using hotel crockery and stemware. None of the plastic Melamine and steel forks and spoons that passed for our everyday fare on the farm in the country where I grew up.

The staff had that lovely lilt to their language common to Virginia and Maryland, still understandable to this Yankee, but exotic and hinting of amusement and charm that folks at the feed store could never muster. It isn’t just a place but an era. There I met my first General and saw my first President (Eisenhower) and four star generals from a distance. Soldiers of all sorts would grab lunch at the hotel, rather than suffer a sandwich at their desks. It was a regular thing for big black limousines from Washington, D.C. to pull up and discharge their big-wig passengers at the hotel or across the street at Fort Monroe. There I honed my eye at identifying the war ships passing by outside the window… everything from tenders, mine sweepers and captain’s gigs to destroyers, cruisers, battleships and aircraft carriers. One day, three submarines went by in the space of four hours! For a country boy, it was magical.

And the girls… oh my. I gave and lost my heart more times than I can count over the years to Southern Belles. The combination of that first spring warmth after the grip of a northern winter, the heady freedom of unsupervised time, the young women on vacation from Richmond and Atlanta and Washington, D.C. — it was magic. My first real kiss was at the Hotel Chamberlain. Later dalliances were even more memorable.

{Is it hot in here?}

My last trip there was 1966, a year after my mother died. I was older and much wiser. I could see the old girl had aged. The floors were warped from forty years of salt air. Furnishing were a little frayed, rugs threadbare in spots. And yet, I miss the place, the actual building, the genteel company, the sense of infinite time spread out before me. Oh lordy, youth is truly wasted on the young.

Morse Code…..


… is painful to learn. I’ve been using CodeQuick, the ARRL CDs, Ham University, the program for Palm, and a few other software programs. I want to try and take the exam this Saturday. We’ll see.

Working the projects….

I have two desktops for the radio room. The first is a Compaq Presario, is fairly new, has beefy RAM, a nice speedy processor, and running WinXP. I’ve been using the Presario for (1) running the RX-320 using RxPlus, (2) host for syncing with the Palm IIIxe, (3) burning CDs, (4) web browsing. The other desktop is an older eMachine – 700MHz, 64MBs of RAM, running WinME. I bumped the RAM up to a total of 192MB and added a PCI card that gives me two additional serial ports. Prior to today’s memory upgrade I’ve been using the eMachine for running packet and WinLink2000/Airmail through a serial link to my TNC (Kantronics KPC-3+) into my IC-706MKIIG. Pretty low impact stuff. Since the memory upgrade, I’ve attached the IC-PCR1000 and installed RxPlus… which runs a little more sluggishly on the eMachine as opposed to the Presario. But the IC-PCR1000 appears to be working. I still need to get the discone antenna installed outside.

An interesting note – I’d forgotten how buggy WinME was. Major pain installing the memory, the additional PCI card with the serial ports.

Projects, projects, projects

I’ve got several small projects I’m working on in the Radio Room.

(1) TenTec RX-320: it’s up an running fairly well – my work horse for shortwave, but can also monitor the ham bands up to 30MHz. I’m using Noël Bouchard’s RxPlus which has so far proved to be an awesome piece of software (PSK-31 works great, but haven’t gotten the RTTY to work yet). I’ve got an active antenna up an operational (McKay Dymek DA-100E), which makes a huge difference.

The only thing left is to get the ILGRadio database to work properly. So far it’s been a bit wiggy working with RxPlus.

(2) IC-PCR1000: I haven’t got this hooked up yet. My intent is to connect it to my discone antenna – I’d like to use the IC-PCR1000 for monitoring all the activity from 30MHz to 1.3GHz.

There’s a few things a need to do before I get it up and running. I’ve got to get the computer ready first. (a) Add a PCI card with 2x serial ports and (b) load the computer with software (probably RxPlus), (c) either find the AC power adapter or use one of my Radio Shack wall warts, (d) I guess I shouldn’t forget to mention that the discone needs to be installed outside – I don’t really have a plan for that yet.

(3) Palm m125: it’s a step up from my Palm IIIxe. The best feature about the m125 is that it accepts a SD memory card and for power it takes 2x AAA batteries. I’ll use an SD card to keep the m125 backed up (i.e. backupbuddyVFS) and I don’t have to worry about a proprietary power charger. When the power dies, I just pop in 2x AAAs and then use the SD card to revive the Palm – no need to worry about getting the Palm back to the home computer for a sync in order to restore it.

What I’m using (or going to use) the m125 for are:

(a) learning Morse Code with Smart Morse…

it’s a great program that teaches the letters individually.

(b) – but I need a cable to connect the m125 to the TH-D7A. Fortunately, Mobile Driven offers the answer..

… this will allow me a simple solution for using my TH-D7A for both packet radio and APRS.

New York, Pennsylvania, Ohio, Indiana

Buffalo, NY – South Bend, IN
Daily Mileage: 455
Total Mileage: 1603
Total Number of States Traveled: 12

I started the morning in Buffalo, finding a Starbucks just down the street. After heading out of Buffalo and stopping by the edge of still frozen Lake Erie,…


I got on to Route 20 and headed west. This part of New York is actually wine country – there are vineyards all along Route 20. I stayed on Route 20 until I crossed into Pennsylvania and passed through the city of Erie. Back on I-90, I made good time into Cleavland to my day’s objective:


The Rock & Roll Hall of Fame – totally awesome!


I could have spent the whole day there. It’s about 6 floors with interactive displays and just all kinds of amazing stuff. Back on to I-90, I kept going west. A little west of Toledo I decided to give a call on the 2m national simplex calling frequency and had a great conversation with Tom, a J. B. Hunt trucker who was also heading west. He’s based out of Buffalo and was heading up to Wisconsin. Tom’s got an ICOM IC-706MKIIG – it does HF and he’s able to talk to folks all over the country while driving his truck.

I continued to make good time and made it into South Bend, Indiana shortly after 8:30pm.

Comfort Suites Hotel
52939 S.R. 933 N.
South Bend, IN 46637

Massachusetts, New York

Hyannis, MA – Buffalo, NY
Daily Mileage: 540
Total Mileage: 1148
Total Number of States Traveled: 9


I headed up to Plymouth… saw “The Rock”.


Skirted around Boston and headed west on Route 2. It was nice to be off the beaten path.


Route 2 headed up into the mountains on what’s called the Mohawk Trail. I stayed on Route 2 until I got to Troy, NY where I jumped on I-90 and continued west.

I crawled into Buffalo a little after 8pm. That damn GPS brought me in through the bad part of town… I’m thinking it’s doing that on purpose.

Best Western Inn – On The Avenue
510 Delaware Ave
Buffalo, NY 14202

The truck needs gas and a good washing.

The goal tomorrow is to make it to the eastern bank of the Mississippi.