News from the shack

Keeping the shack in some semblance of order has always been a challenge for me. But the battle continues. Maybe a year ago or more I went through my shelves and transferred the vast majority of the contents that had been stored in a collection of totes and cardboard boxes to a fairly standardized set of see-through storage totes. During the holidays I went through these totes again to actually sort through the items to (1) see what I actually have and (2) attempt to organize and group items in some sort of systematized fashion. And now I am just about there.

Here is a list of small projects I have been working on or hope to soon:

(1) I have an EchoIRLP node that is connected to my shack’s TM-D710A. Previously when someone connects to my node, my only indication is to hear the fan start on the TM-D710A. I have an old, unused and gathering dust, Uniden Bearcat BC245XLT scanner that would be perfect to monitor my nodes frequency from inside the shack. The battery pack that supported the BC245XLT had long expired. Now that all my Anderson Powerpole items are organized I was able to find the correct 12v cable with fitting connector to power up the scanner sitting on the shelf. Now if someone connects and I am in the shack, I will certainly hear them.

(2) There is a lot of excess gear in the shack. Stacks of stuff I really do not need and am not going to use. Now it is time to part with it and send it to a good home. And now I can figure out what I have and what I can sell.

(3) Clean up my J-38. I have checked out the key, it adjusts well and I have used it for some QSOs. I have ordered a base for it from Wally, W6PPP, who has an eBay store that sells a variety of sturdy bases for straight keys as well as knobs for keys.

(4) Adding the sidecar (formally called an attendant console) to my Hamshack Hotline connected Cisco SPA525G2. I can use the sidecar to load up speed dial numbers for connecting to RF nodes, a constant stream of Art Bell shows, or the BBC. If you have a Hamshack Hotline, give me a call: 6100000065.

(5) When the weather clears, I hope to get some work done on the dipole as well as replacing the Davis Vantage Pro2.