Here is a a re-cap of my amateur radio activities during my past twelve months in Korea:
(1) DX – I enjoyed working a good bit of DX, enjoying most QSOs with stateside contacts as well as Pacific exotics. The greatest limitation I had was my operation location and resulting inability to ideally situate an HF antenna. Living in the barracks (the ultimate in CC&R) restricted any type of permanent antenna installation, further limiting my options. I solely used a Buddipole (which after many additional accessory purchases, became two Buddipoles). Despite the antennas being positioned next to a three story building, I was able to make contacts to North America, South America, Europe, and even Africa. I credit this to improved band conditions over the past months and also the Buddipole… it’s a keeper.
(2) EchoIRLP node – I brought my embedded EchoIRLP node to Korea and interfaced it with a Kenwood VHF/UHF rig. Again, with my poor location and inability, I could not have an antenna installed outdoors. Instead, I kept the Kenwood rig at its minimum wattage setting and used a roll-up J-Pole made from ladder line. With my HT also set on minimum power, I was able to make effective use of the EchoIRLP node. My primary contacts via the node were with the XYL back in Kansas. She has a mobile VHF rig, to include APRS. I could check to see when she was on the road for her morning or afternoon commutes, connect through my EchoIRLP node here in Korea to our EchoIRLP node back in Kansas. With the XYL’s rig set to the frequency of the Kansas node, I could frequently ride along with the XYL and harmonics as they moved about. Additionally, the Echolink capability of the embedded node allowed me to regularly talk to my dad, KD6EUG, while he connected to my node via an app on his cell phone. Another great enjoyment was the ability to monitor the different IRLP reflectors and sometimes participate in ongoing nets. I am sold on the flexability of the embedded EchoIRLP node and will take it with me again when I get deployed for a long duration.
(3) D-STAR – starting with a D-STAR Dongle, I moved to a DV Access Point and got an ICOM D-STAR HT. I enjoyed playing with D-STAR and the ease of having the Access Point as well as the IC-92AD (http://www.universal-radio.com/catalog/ht/5092.html) made using D-STAR pretty straight forward. There is no aruging that the audio quality for D-STARS is poor. The complicated nature of setting up a rig at home for the XYL would also make D-STAR a poor choice to replace the EchoIRLP node. However, I enjoyed having the flexibility of having the ability of getting on D-STAR.
(4) Linux – all my radio operations here were supported by using the Ubuntu distrobution of Linux. After toying with CQRlog, I have settled on fldigi as my primary interface to my HF rig.
(5) APRS – although my APRS operations here were limited to the internet (Korea has virtually no APRS traffic), I used xastir (www.xastir.org) to show where my operating location was and also advertised my EchoIRLP node.
(6) WX station – never happen. I could not find a good location to place the collector, so it is still in the box. More importantly, wgoohat I didn’t get the opportunity to learn was how to interface a weather station to the APRS application xastir.
(7) Stars & Stripes article – I was able to discuss my amateur radio experiences with a reporter from Stars & Stripes.
Skip to content
Amateur Radio – a hobby where people talk about their hobby using their hobby.